ADIC SNC 5100 Guide de l'utilisateur télécharger pdf (Page 42)

SNC 5100

34 Event Codes and Actions

6-00020-02

Event Codes and Actions

Review all visual observations and Event Codes against Table 7 on page 35.

Check Event Log

Step 1. To determine what Events are in the Event Log, follow the

procedures in the ADIC Management Console User Guide.

Step 1. If the ADIC Management Console application is not available,

connect a service terminal to the SNC 5100.

For information about how to do this, see “Connecting to the

Service Port” on page 95.

Step 2. Press the Enter key on the service terminal.

If the prompt is not displayed, go to “Service Port MAP” on

page 75.

Step 3. Issue the

loggerDump command from the service terminal.

For more information, see the

"loggerDump [number]"

command on page 141.

Messages that looks like the ones in Figure 5 display:

Figure 5: Event Log Listing From Service Port

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 227 228

Pas de commentaire

ADIC SNC 5100 Guide de l'utilisateur Page 42