ADIC DS9000 Series Manuel d'utilisateur télécharger pdf (Page 53)

Drive Configuration

DLT7000/DLT8000 Drives

If the host computer system does not generate SCSI bus parity, disable the parity checking procedure in the

DLT7000/DLT8000 drive by installing a jumper over two pins on the DFDT connector. See Figure 11 for location

of the connector.

Front

Bezel

Right Side

TRM PWR Connector

DFDT Connector

Figure 11. DLT7000/DLT8000 Tape Drive Connectors (right side)

Figure 12 shows which pins of the DFDT connector have to be connected by jumper cables in order to disable parity.

Disable

Parit

Figure 12. Disable Parity Pins on DFDT Connector

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Pas de commentaire

ADIC DS9000 Series Manuel d'utilisateur Page 53